Heavy metals, polycyclic aromatic hydrocarbons and polychlorinated biphenyls in surface sediments of the Naples harbour (southern Italy)

The Naples's harbour is one of the largest and most important commercial and tourist port of the Mediterranean basin. It is located on the southeast coast of Italy and receives industrial and municipal wastewaters from the city of Naples. Due to its social and economic impact, a comprehensive assessment of levels and sources of contamination of bottom sediments in this area of the Mediterranean basin is essential to identify potential danger due to mobilization of contaminants produced by managing of the same sediments. In this study, superficial sediments collected from 189 sampling sites were analyzed for grain size, heavy metals (Cr, Cu, Ni, Pb, V, Zn, Co, Sn, Cd, Hg, As, Al and Fe), 16 priority polycyclic aromatic hydrocarbons (PAHs) and perylene and 38 individual polychlorinated biphenyl (PCB) congeners. Compared to the estimated local background, Cu, Zn, Pb, Cd, Sn and Hg show enrichment factors >3 and only Hg evidences a median value higher than the NOAA (effects range - median) guidelines. Principal component analysis allowed us to clearly discriminate two areas mainly affected by heavy metals contamination and influenced by different sources related to industrial, commercial and/or urban activities. Priority PAHs are predominantly represented by three-five-ring compounds with concentrations ranging between 9 and 31774 ng g(-1) and frequently higher than the NOAA ER-M index. A prevalent pyrolitic origin of PAH was assessed on the basis of the relative abundance of the different congeners and selected isomer ratios. The concentrations of PCBs, as sum of the 38 congeners, ranged from 1 to 899 ng g(-1), with a predominance of highly chlorinated (tetra- and penta-chlorobiphenyls) congeners. WHO-TEQ values, calculated for the PCDD-like PCB congeners, suggest a relatively high level of toxicity. Generally, the concentration of PAHs and PCBs were higher near the sites of intense industrial, shipping and/or commercial activities suggesting a direct influence of these sources on the pollutant distribution patterns.     

Long-term dynamics of terrestrial carbon stocks in Austria: a comprehensive assessment of the time period from 1830 to 2000

This article presents a comprehensive data set on Austria’s terrestrial carbon stocks from the beginnings of industrialization in the year 1830 to the present. It is based on extensive historical and recent land use and forestry data derived from primary sources (cadastral surveys) for the early nineteenth century, official statistics available for later parts of the nineteenth century as well as the twentieth century, and forest inventory data covering the second half of the twentieth century. Total carbon stocks—i.e. aboveground and belowground standing crop and soil organic carbon—are calculated for the entire period and compared to those of potential vegetation. Results suggest that carbon stocks were roughly constant from 1830 to 1880 and have grown considerably from 1880 to 2000, implying that Austria’s vegetation has acted as a carbon sink since the late nineteenth century. Carbon stocks increased by 20% from approximately 1.0 GtC in 1830 and 1880 to approximately 1.2 GtC in the year 2000, a value still much lower than the amount of carbon terrestrial ecosystems are expected to contain in the absence of land use: According to calculations presented in this article, potential vegetation would contain some 2.0 GtC or 162% of the present terrestrial carbon stock, suggesting that the recent carbon sink results from a recovery of biota from intensive use in the past. These findings are in line with the forest transition hypothesis which claims that forest areas are growing in industrialized countries. Growth in forest area and rising carbon stocks per unit area of forests both contribute to the carbon sink. We discuss the hypothesis that the carbon sink is mainly caused by the shift from area-dependent energy sources (biomass) in agrarian societies to the largely area-independent energy system of industrial societies based above all on fossil fuels.     

Reliability of groundwater vulnerability maps obtained through statistical methods

Statistical methods are widely used in environmental studies to evaluate natural hazards. Within groundwater vulnerability in particular, statistical methods are used to support decisions about environmental planning and management. The production of vulnerability maps obtained by statistical methods can greatly help decision making. One of the key points in all of these studies is the validation of the model outputs, which is performed through the application of various techniques to analyze the quality and reliability of the final results and to evaluate the model having the best performance. In this study, a groundwater vulnerability assessment to nitrate contamination was performed for the shallow aquifer located in the Province of Milan (Italy). The Weights of Evidence modeling technique was used to generate six model outputs, each one with a different number of input predictive factors. Considering that a vulnerability map is meaningful and useful only if it represents the study area through a limited number of classes with different degrees of vulnerability, the spatial agreement of different reclassified maps has been evaluated through the kappa statistics and a series of validation procedures has been proposed and applied to evaluate the reliability of the reclassified maps. Results show that performance is not directly related to the number of input predictor factors and that is possible to identify, among apparently similar maps, those best representing groundwater vulnerability in the study area. Thus, vulnerability maps generated using statistical modeling techniques have to be carefully handled before they are disseminated. Indeed, the results may appear to be excellent and final maps may perform quite well when, in fact, the depicted spatial distribution of vulnerability is greatly different from the actual one. For this reason, it is necessary to carefully evaluate the obtained results using multiple statistical techniques that are capable of providing quantitative insight into the analysis of the results. This evaluation should be done at least to reduce the questionability of the results and so to limit the number of potential choices.     

Environmental assessment of different management options for individual waste fractions by means of life-cycle assessment modelling

Several alternatives exist for handling of individual waste fractions, including recycling, incineration and landfilling. From an environmental point of view, the latter is commonly considered as the least desirable option. Many studies based on life-cycle assessment (LCA) highlight the environmental benefits offered by incineration and especially by recycling. However, the landfilling option is often approached unjustly in these studies, maybe disregarding the remarkable technological improvements that landfills have undergone in the last decades in many parts of the world.This study, by means of LCA-modelling, aims at comparing the environmental performance of three major management options (landfilling, recycling and incineration or composting) for a number of individual waste fractions. The landfilling option is here approached comprehensively, accounting for all technical and environmental factors involved, including energy generation from landfill gas and storage of biogenic carbon. Leachate and gas emissions associated to each individual waste fraction have been estimated by means of a mathematical modelling. This approach towards landfilling emissions allows for a more precise quantification of the landfill impacts when comparing management options for selected waste fractions.Results from the life-cycle impact assessment (LCIA) show that the environmental performance estimated for landfilling with energy recovery of the fractions “organics” and “recyclable paper” is comparable with composting (for “organics”) and incineration (for “recyclable paper”). This however requires high degree of control over gas and leachate emissions, high gas collection efficiency and extensive gas utilization at the landfill. For the other waste fractions, recycling and incineration are favourable, although specific emissions of a variety of toxic compounds (VOCs, PAHs, NO_x, heavy metals, etc.) may significantly worsen their environmental performance.     

Dynamic model of Lake Chozas (León, NW Spain)—Decrease in eco-exergy from clear to turbid phase due to introduction of exotic crayfish

We developed a dynamic model of the phosphorus cycle in Lake Chozas, a small shallow water body in León (NW Spain). The calibrated model simulated seasonal dynamics of phosphorus concentrations in major components of the lake's ecological network before and after 1997, the year when an invasive allochthonous crustacean, the Louisiana red swamp crayfish (Procambarus clarkii), was introduced into the lake. The shift from clean to turbid phase, due to grazing by crayfish on submerged vegetation, caused a gradual decrease in eco-exergy, reflecting an increase in entropy, related to breakdown of ecosystem internal equilibria. This case study verifies the hypothesis of Marchi et al. (2010) that, after an initial relatively stable state, the allochthonous species may cause an increase in entropy indicating perturbation of the ecosystem.     

Food web structure and trophic interactions of the tropical highland lake Hayq, Ethiopia

We generated a mass-balance model to figure out the food web structure and trophic interactions of the major functional groups of the Ethiopian highland Lake Hayq. Moreover, the study lay down a baseline data for future ecosystem-based investigations and management activities. Extensive data collection has been taken place between October 2007 and May 2009. Ecotrophic efficiency (EE) of several functional groups including phytoplankton (0.8) and detritus (0.85) was high indicating the utilization of the groups within the system. However, the EE of Mesocyclops (0.03) and Thermocyclops (0.30) was very low implying these resources were rather a ‘sink’ in the trophic hierarchy. Flows based on aggregated trophic level sensu Lindeman revealed the importance of both phytoplankton and detritus to higher trophic levels. The computed average transfer efficiency of 11.5% for the first four trophic levels was within the range for highly efficient African lakes. The primary production to respiration (P/R) ratio (1.05) of Lake Hayq indicates the maturity of the ecosystem. We also modeled the food-web by excluding Tilapia and reduced phytoplankton biomass to get insight into the mass balance before Tilapia was introduced. The analysis resulted in a lower system omnivory index (SOI = 0.016) and a reduced P/R ratio (0.13) that described the lake as immature ecosystem, suggesting the introduction of Tilapia might have contributed to the maturity of the lake. Tilapia in Lake Hayq filled an ecological empty niche of pelagic planktivores, and contributed for the better transfer efficiency observed from primary production to fish yield.     

Emergy and emergy algebra explained by means of ingenuous set theory

Emergy is an important concept that has originated several effects in ecology, systems ecology and sustainability science. Its communication, however, has always presented several problems, since it does not follow the same rules of conservation as other energy-based approaches. Attempts have been made to clarify emergy by means of more formal/mathematical approaches, but the problem persists. In this paper, we have introduced a view of emergy and of its algebra based on ingenuous set theory. By means of this simple tool, emergy can be defined as the set of solar exergy that is directly and indirectly necessary to make a product. The operation that correctly sums the emergy “carried” by the inputs to a process is the union. This definition and the operation of union are able to account for all the rules of emergy algebra.     

Behavioral and life-history evidence for interspecific competition in the larvae of two heliconian butterflies

Interspecific competition in herbivorous insects remains a controversial issue. To date, many studied systems have not met assumptions of the traditional competition theory, and a new paradigm has been emerging. We examined the behavioral and life-history consequences of common host plant use of Heliconius erato and Dryas iulia (Nymphalidae) in relation to Passiflora suberosa (Passifloraceae). Larvae of the former use the apical portion of this host; the latter is presumably able to explore all plant parts. We assessed host use pattern in relation to leaf age, when reared either alone (D. iulia) or together (D. iulia and H. erato). Larval feeding choice tests with respect to leaf age were performed, and performance was recorded. Observations were made to assess antagonistic behavior of H. erato and D. iulia towards each other, if any. Similarly to H. erato, D. iulia fed on the young leaves significantly more than the mature ones; larvae were not induced to prefer mature leaves. First instars of H. erato used only the apical parts of P. suberosa and displayed aggressive behavior towards D. iulia, which moved to the lower shoot portions. Larval mortality and development time of both species significantly increased when reared together; such performance costs were more pronounced in D. iulia than H. erato. Our study gathers evidences that use of P. suberosa by these heliconian butterflies represent a case of competitive exclusion resulting in niche differentiation, where costs are higher for D. iulia than H. erato.